How To Clean A Clothes Iron

A dirty clothes iron can damage your cloths so it is important to keep your iron clean.

Of course, you can go ahead and buy one of the iron cleaners available on the market, but there are ways to avoid that extra expense. Here are a few ideas to use, using what you might already have on hand.

To begin, the water reservoir should be cleaned regularly. To do this, simply heat the iron, then pour in a mix of water and white vinegar. Allow the iron to steam while ironing over a scrap rag. Drain this out and repeat the process one or two times more until the mineral spots are gone. When done, fill with clear water and iron over the rag to clear any remaining trace of vinegar.

If you prefer, you can simply fill the reservoir one-fourth full with white vinegar and using the steam feature, run the iron over a rag. As above, repeat this until all mineral spots are gone, then fill with clear water and iron over the rag until the reservoir is empty.

Running your iron over an old newspaper on its hottest setting will usually clean off most of the dirt and grime clinging to your iron's faceplate. If not, you can wipe it off with a soft cloth and a spray of an all-purpose cleaner like 409.

If you want to avoid chemical cleaners, wipe the iron with a soft cloth dampened in white vinegar. Once the faceplate is cleaned to your satisfaction, wipe off the cleaner with a water dampened cloth.

Burnt starch on an iron is a simple fix. Using the dry iron setting (no steam) set to hottest temperature, iron firmly over a wet terrycloth rag or towel until the starch transfers to the cloth. You can also iron over a plain brown paper bag (with no print) which has been sprinkled with salt. The salt will clean the faceplate without scratching or damaging it. Once the faceplate is clean, wipe it with a damp cloth to remove any stray salt crystals.

To clean off oily residue, wipe the cooled iron face with a soft cloth and ammonia. Once the residue is cleaned away rinse off the ammonia.

Occasionally you might accidentally melt plastic or fabrics on your iron. This is not something to panic over. The plastic can be removed without damaging your faceplate. To do this, turn off your iron and allow it to cool. Run the cooled iron over a plain brown paper bag with no advertising print on it. This should clean off most of the melted material. If there is still some clinging to your faceplate, using a wooden skewer (like you would use to make kabobs) gently pry away the material. You can remove any dark staining caused by the melted material with a bit of vinegar and water

Finally clean out the steam vents on the faceplate. Be sure to unplug the iron for this. Let it cool down, then using a cotton tipped swab, gently wipe out the dirt and grime.

Keeping your iron clean and well maintained is important for the life of both your iron and your cloths, and it only takes a bit of time

Happy Teachers Day!!!

Checked the Bizarre American Holidays page for today (June 6) and it declared today Teachers Day. Okay, wasn't that in May, you ask....A little checking about and I discovered that Teachers Day was first unofficially celebrated on June 6th in the year of our lord, 1931, by a group of famous Chinese teachers. At the time, this was not a formal holiday approved by the Chinese Nationalist Party.

So, to all the teachers out there reading this today, have a wonderful, relaxing day and bask in the greatness of your contributions to the nation's children.

For the rest of ya, why not get on the phone and give that lady or gent that had your kids for those long nine months last year and let 'em know you appreciated the long hours of instruction they spent to give your kids that first non-parental, social leg-up that guides them in the laborious journey to adulthood.

Gallimaufry is....

According to The Free Dictionary the definition of Gallimaufry is a jumble or a hodgepodge. That just about sums up the idea behind this blog. Expect anything here. Believe...well...you can be the judge of the real and the imagined. That's half the fun. This is where I'm gonna cut loose and just say whatever the heck comes to my mind and let the crap hit it.

Now understand, I'm new to this sort of thing. Blogging, I mean. Oh, I've opened a few from time to time, then lost track of 'em. Guess no one else was really interested in what was going on on them either, because no one ever asked, "So, whatever happened to that blog you opened back in '99..."

Neither here nor there. Life goes on, don' it?

This time though I'm pinning the future on response and garbled thoughts. Speak to me, peeps. You are here to keep me in line, as it were. In other words.... Guidance of the folks in the know is encouraged.

Happy National Doughnut Day, guys.